Construction

Construction

I needed weights inside the bass to counter my really long stiff goose neck, so i will add two in

Here ive decided to move the weights around in the bass, so i have placed the hole in the center of the lead  so the biggest end can just fit in.

This is the other side of the lead that jsut had the whole cut in,. this is for the bigger nut to go onto, and be stuck into, so the neck dosnt come out, and we be able to use the counter weight more properly

ive used European cedar as my wood for the base. ive manual routed it out for my counter weights to go into

here i had to re thread the tip of my exsisting goose neck as the thread was way to fine. so changed that to a M16 thread cut.

got a nut that was m16. had to lathe it in half because it was to fat.

 thats how it threads onto the new goose neck

How it will be assembled with the counterweight

electronics that i am using, jsut 3 LEDs , with a button as the switch, that is placed in the center

exsisting battery pack that i am incorporating in my design

how my goose neck and base look when they have been constructed.